- Now manufactured by IET Labs
- 20 Hz to 1 MHz frequency range (27,000 possible test frequencies)
- 0.1% basic measurement accuracy
- Measures 15 impedance parameters, dc resistance, voltage and current
- Wide measurement range with 5 digit measurement resolution
- Four-terminal Kelvin connections to maintain measurement integrity
- AC test voltage programmable from 20 mV to 1V
- CE marked
- 1920 internal dc bias voltage, programmable from 0 to 2 V
- IEEE-488.2,RS-232, handler, and serial printer interfaces all standard
- IET 1910 and 1920 LabView driver for IEEE-488.2 and RS-232
Why Buy The 1920 Precision 1 MHz LCR Meter?
- Robust and production oriented LCR meter for automating your impedance measurements
- A wide frequency range 20 Hz to 1 MHz at an affordable price
- When both ac impedance and dc resistance measurements are needed
- Standard RS232, IEEE-488 & PLC interfaces simplify automation
- Configure instrument and log results to PC using the 1900 Virtual Front Panel or LabView driver
Description
The 1920 1 MHz LCR Meter is the most popular and designed to perform capacitance and impedance measurements on a variety of electronic components and materials over a frequency range from 20 Hz to 1 MHz. The 1920 features programmable bias voltage from 1 mV to 2 V for biasing capacitors and other semiconductor devices during measurements.
Emphasis has been placed on ease of use through menu programming, and fast accurate production testing via its remote control capability with RS-232, handler and GPIB interfaces.
15 Different Impedance Parameters/20 Total Parameters Measure and display any two parameters simultaneously, to achieve coverage and flexibility not previously available.
Automatic Test Sequencing Run up to six different tests in sequence with a single push of the start button. Each test can have different conditions and limits.
Program Storage Test setups can be stored and recalled from internal memory. The front panel can be locked out, with password protection, to ensure procedures are run the same way every time.
Configure instrument and log results to PC IET offers a Window based program that can be downloaded for free. 1900 Virtual Front Panel
If you are looking for a more cost effective or higher preforming LCR Meter such as the IET / QuadTech 7600 Precision LCR Meter or IET / GenRad 1689 Digibridge, See our LCR Meter Selection Guide
1920 Precision 1 MHz LCR Meter Basic Specifications
Measured Parameters and Basic Measurment Accuracy:
Parameter | Measurement Range | Fast | Medium | Slow |
Ls,Lp | 0.001 nH to 99.999 H | +/-0.5% | +/-0.25% | +/-0.1% |
Cs,Cp | 1 pF to 9.9999 F | +/-0.5% | +/-0.25% | +/-0.1% |
DF | 0.00001 to 99.999 | +/-0.005 | +/-0.0025 | +/-0.001 |
Q | 0.00000 to 9999.9 | +/-0.005 | +/-0.0025 | +/-0.001 |
Y,Gp,Bp | 10 nS to 9999.9 S | +/-0.005 | +/-0.0025 | +/-0.001 |
|Z|,Rs,Rp,Xs,ESR | 0.0001 mΩ to 99.999 MΩ | +/-0.5% | +/-0.25% | +/-0.1% |
Phase Angle | -180.00 to +179.99 degrees | +/-1.8° | +/-0.9° | +/-0.18° |
DCR | 0.1 mVto 100 KV | +/-0.5% | +/-0.25% | +/-0.1% |
DUT AC Voltage | 20 mV to 1.0 V | +/-0.5% | +/-0.25% | +/-0.1% |
DUT AC Current | 1 μA to 150 mA | +/-0.5% | +/-0.25% | +/-0.1% |
DUT DC Voltage | 20 mV to 1.0 V | +/-0.5% | +/-0.25% | +/-0.1% |
DUT DC Current | 1 μA to 150 mA | +/-0.5% | +/-0.25% | +/-0.1% |
*At optimum test signal levels, frequencies, DUT values and without calibration uncertainty. Capacitance (Cs/Cp), Inductance (Ls/Lp), Resistance (Rs/Rp), Dissipation (D) and Quality (Q) Factors, Impedance Z , Admittance Y , Phase Angle (0-), Equivalent Series Resistance (ESR), Conductance (Gp), Reactance (Xs), Susceptance (Bp) Note: s = series, p = parallel, ESR equivalent to Rs
Test Frequency Range: 20Hz to 1MHz, Continuous
Test Frequency Resolution: 1Hz from 20Hz to 1kHz, 4 digits >1kHz
Test Frequency Accuracy: +/- (0.01% +0.02 Hz)
Measurement Speed: Fast: 40 meas/sec Medium: 8 meas/sec Slow 1 meas/sec
Ranging Automatic,Range Hold or user selectable
Trigger internal (automatic) External(via RS-232,IEEE-488.2 or Handler interfaces Manual
Source Impedance 5V, 25V, 50V, 100V, or matched impedance, range dependent
AC Test Signal Voltage: 20mV to 1.0V (open circuit) in 5 mV steps
DC Bias Current Internal: 0.0 to 1.0A in 1mA steps External: up to 20.0A
Standard Interfaces IEEE-488.2 • RS-232 • Handler • Serial Printer
Measurement Delay Programmable from 0 to 1000 ms in 1ms steps
Averaging Programmable from 1 to 1000
Median Value Averaged over last three measurements
Built-in automatic calibration procedure
Test Terminals Front panel, four terminal (BNC) Optional Test Fixtures Available
Dimensions: 17x 5.25x 16in (432x 133x 406 mm)
Weight: 15lbs (8kg) net, 21lbs (9.9kg) shipped