Capacitance

• Accurate 0.5% to 4%
• Wide range from 50 pF - 1000 µF (depending on model)
• Resolutions as good as 1 pF (depending on model)
• Broad choice of standard and optional models with many powerful features
• Compact, convenient, and rugged

• Available in values from 0.001 pF - 1000 pF
• Excellent performance at high frequencies
• ISO-17025 accredited calibration included with the standard

• Available in 10 pF, 100 pF,1000 pF, 5000 pF 10,000 pF
• 20 ppm/year stability, history has shown this to be a very conservative specification
• The national laboratory standard for capacitance
• For calibrating highest level standards
• Standard for dissipation factor
• 5 year warranty included 

• Ultra-high Stability Capacitor
• 10 pF and 100 pF

• 7 Switch-Selected Standard Capacitance Values: 1 µF, 10 µF, 100 µF, 1 mF, 10 mF,100 mF, 1 F
• 3 Switch-Selected Test Frequencies: 100 Hz,
  120 Hz, 1 kHz
• 0.25% direct-reading capacitance accuracy
• 0.1% or better ratio accuracy

As of 2023 the 1419 is no longer available. IET can still repair or calibrate this. For new units consider

For a lower-cost solution CS Series

For a more precise solution 1412-BC

• Range as low as 0.002 pF and as high as 1150 pF (Depending on Model)
• Stability: better than 0.02% full scale per year
• Settable to 40 ppm
• Low temperature coefficient, low losses
• Wide selection to suit needs

• Range 100pF - 1.111 µF
• ±0.05% accuracy
• two- or three-terminal connection
• Ideal for calibration of 2-terminal handheld DMMs

• 10^-5pF to 11.1 µF, 2-or 3-terminal
• frequency range 20 Hz -20 kHz (or higher)
• 0.01% accuracy, 1-ppm resolution
• reads dissipation factor or conductance
• combines GenRad 1615 Capacitance Bridge, 1232-A Null Detector & 1311-A Oscillator

• Range 10^-7 pF to 10 µF, 12-digit readout
• 10-ppm basic accuracy
• frequency range 10 Hz - 100 kHz
• combines GenRad 1616 Capacitance Bridge, 1238-A Null Detector & 1316 Oscillator

• 0.1% measurement accuracy
• 4 test frequencies 100 Hz to 10 kHz
• 5 impedance parameters
• Built-in test fixture

• The world's standard for AC resistance, low frequency inductance and Capacitance measurement
• 0.02% Measurement Accuracy and +/- 0.0001 Df
• Programmable Frequency 12 Hz - 100 kHz
• Widely accepted impedance meter in a metrology environment
• 1689 has a built-in 4 terminal kelvin fixture for testing axial and radial components
• 1689M has four BNC connectors for use with a wide variety of standard accessories

• 0.05% measurement accuracy
• 5 test frequencies 100 Hz to 100 kHz
• 5 impedance parameters
• Built-in test fixture

• The world's standard for ac resistance, low frequency inductance and capacitance measurement in a metrology environment
• 0.02% measurement accuracy and +/- 0.0001 Df
• Programmable frequency 12 Hz - 200 kHz
• Extremely reliable can last up to 30+ years

• Range from 1 pF to 11,111 µF
• High accuracy of 0.05% + 0.5 pF
• Units available with as few as 3 and as many as 11 decades
• Excellent Stability 100 ppm per year
• 3-Terminal shielded construction

• The world's only programmable capacitance decade box
• Wide range and resolution: 1 pF to 100 µF
• Available at accuracies of : 0.5%, 1% and 4%
• LabVIEW Drivers for IEEE-488.2 and RS-232 Versions
• Dual / Combo rackmount models ( examples:Resistance & Capacitance )

• Combination of resistance and capacitance decades
• Accurate 0.1% to 4% (depending on model)
• Capacitance range 100 pF - 100 µF
• Resistance range 1 Ω - 10 MΩ
• Compact, convenient, and rugged

• Values from 1 pF to 10,000 µF in any custom value available
• Stability as good as ±0.01 %/year
• Two-to-five terminal configuration, depending on model
• Excellent TC: as low as 10 ppm/°C
• 3 year warranty included